Overview
The Signal Clamp is a lightweight, robust 100mm clamp used to apply a traceable signal to buried cables and pipes when used in conjunction with a Digicat signal transmitter. Perfect for use in areas where you can see obvious signs of buried utilities (i.e. drain cover) and you want to identify a specific utility.
The Signal Clamp operates in 33kHz.
Applications
The Signal Clamp is connected to a Digicat signal transmitter, then clamped around the outer sheath of the buried utility. Using a Digicat cable locator on the surface you will then be able to locate or trace a particular utility.
The Signal Clamp is ideal for:
- Locating and tracing the path of a specific utility
- For highly congested areas of buried utilities
- To increase the thoroughness of your utility survey.
Features | Digitrace 30/50/80 | Signal Clamp | Digimouse (Sonde) | Property Connection |
8kHz Mode | Dependent on Transmitter | x | ||
33kHz Mode | Dependent on Transmitter | x | x | x |
Mixed 8/33 | Dependent on Transmitter | |||
512Hz Mode | Dependent on Transmitter | |||
640Hz Mode | Dependent on Transmitter | |||
Protection | IP54 | IP54 | IP54 | IP54 |
Working Temperature | -20°C to +50°C | -20°C to +50°C | -20°C to +50°C | -20°C to +50°C |
Battery Type | Not required | Not required | 1 x LR6 (AA) alkaline | Not required |
Battery Life (Typical Use at 20°C) | 40hrs intermittent use at 20°C/68°F in 8kHz mode or 33kHz mode | |||
Weight | 3kg / 3.25kg / 3.5kg | 354g | 180g | 150g |
Dimensions |
Frame - 490mm (H) x 210mm (D) x 440mm (W), Ø8mm rod, Ø13mm tip. |
40mm (H) x 250mm (D) x 142mm (W) exclude Cable Internal diameter 100mm. | Ø38mm x 120mm (W) | 40mm (H) x 80mm (D) x 100mm (W) |